The Advantage of Biomass Boilers

Biomass boilers are as controllable as modern gas condensing systems; heating controls allow the user to correct all of the personal parameters for the central heating and domestic hot water.

In the example of wood chip and wood pellet boilers, then the fuel is fed automatically into the boiler from the fuel store using an auger screw system. The gas burns in the combustion chamber, in which that a combustion process is ensured by a regulated flow of oxygen. The resulting hot gases then heating water in a heat exchanger that feeds the warm water storage tank, or for smaller stoves a back boiler, and finally the heating circuit (radiators in many instances ). You may read more about this particular design of combustion systems on most boiler installed and manufacturer websites; it makes interesting reading to the technically oriented!

Some controllers even permit the user to switch on the boiler remotely through text messaging!

Selecting the right boiler

Several factors will influence the sort of boiler acceptable for a specific project. Below is a listing of the most important factors for consideration.

Space – When there is restricted space on site then the storage of timber fuel could be a restriction. Wood chips will occupy around 3 times more room than wood pellets for the exact same weight of wood.

Biomass boilers- also tend to be bigger than conventional fossil fuel boilers, you will have to get a large enough space to house the unit.

Size of the construction -Typically the larger the building is, the greater the requirement for space heating system and therefore the larger the boiler needs to be. Larger systems so tend to get methods using minimal intervention and will have more fuel. Biomass boilers with automatic auger feed mechanisms and fuel stores are too big for installations. But, domestic systems permit the user to fill out a hopper attached to the boiler.

For most systems, a fuel delivery vehicle will need to access your website. Fuel can be delivered in a variety of ways for pellet orders and majority processors access to the gas shop is crucial. For little domestic deliveries, it is important to have a dry place to stack logs or store bags of pellets. Jobs in urban areas need to be mindful of the number of fuel deliveries (large vehicle movements) necessary throughout the year since this may have planning implications.

Fuel furnish -You may have your fuel source, in which case utilizing logs or chips will dictate the boiler type. If distance and accessibility aren’t a problem wood chips would be considered by projects; however if space is at a premium or the area is sensitive to some greater quantity of fuel deliveries pellets would be the preferred option.

Biomass Boilers-Biomass boilers which burn biomass such as logs, wood shavings or pellets, sawdust and other combustible products like dry litter, garden and home waste or some other matter derived from biological sources to generate alternate heating options is a viable renewable energy alternative that protects the environment, increases heating efficiency and reduces gas bills, whether for domestic or industrial consumption.

Since they emit the identical amount of carbon dioxide that plants absorb for nutrition, these emissions are almost negligible and hence are known as energy resources because it doesn’t adversely impact earth carbon dioxide equilibrium.

Where biomass availability is more, in regions that are in rural areas or off-gas, this is effective and extremely cost-effective sources of energy when compared with fossil fuels like oil or coal and Liquid Propane Gas or LPG.

Anyway, biomass boilers also provide the following benefits:

They are less volatile and cleaner without the presence of soot and other chemical matters that get consumed in the environment.

They’re independent of varying market prices of oil and gas

They provide opportunities for government grants provided eligibility criteria are met

Woodchip drying

The presence of water or moisture content in biomass such as woodchip that’s used for energy production can alter and affect the operation of the system.

Hence there is the need to utilize procedures and equipment for woodchip drying methods vary from simple, passive drying techniques employing airflow to encourage moisture evaporation to lively and innovative methods that are energy-intensive.

Moisture content in woodfuel is considered a problem that was universal because it affects the biomass renewable heating energy process in the following ways:

Latent heat reduction that affects the efficacy

The vapor in the moisture content can carry ultra-fine particle content

Emissions from burning moist woodchip can be far higher than dry woodchip

Producers of woodchips are recognizing that in today’s emerging demand for renewable energy, drier gas is seen because of the need of the hour because they have significance.


Advantage of biomass boilers

Energy efficiency is very important, particularly in the present climate. Switching from fossil fuels into a renewable energy supply can be an efficient way to cut down on your household accounts, in addition to your own emissions.

One of the most well-known sources of renewable energy include solar power and biomass heating systems and the benefits of switching to a biomass boiler are numerous, as they serve as a renewable, carbon-neutral, cost-effective way of heating your property.

As the name suggests, biomass boilers operate by burning biomass, such as wood chips, pellets, and logs. They are sometimes used to provide heat or to power an entire central heating system.

Switching from gas, oil or electricity to biomass heating may lead to considerably reduced energy costs, especially amongst people with high heat utilization requirements. For example, a log or processor biomass boiler will typically operate at a cost of approximately 2 pence per Kwh, while petroleum heating will typically cost 6.5 pence per kWh – more than three times as much.

As demand for fossil fuels around the globe keeps growing, the economies associated with biomass heating will even rise, even taking into consideration the anticipated future cost increases for wood fuel. Heizomat Canada | Fully Automated Woodchip Heating

The gas for biomass heating systems can also be sourced locally, which means that by changing, you can help to support rural businesses and the local market. This neighborhood sourcing of fuel can also result in reduced costs in transportation.

However, along with the financial factors, biomass heating has a number of environmental advantages, for example, reduction of your carbon footprint, which means that you can positively contribute to the health of the planet.

The burning of fossil fuels essentially converts stable carbon into atmospheric carbon dioxide, which, over time, has a catastrophic impact on the planet’s CO2 equilibrium.

Biomass fuel, on the other hand, is considered to be carbon-neutral, since when burned, the fuel emits roughly the identical quantity of carbon dioxide as the plants absorbed whilst they’re still growing. This means there is almost no negative effect on the earth’s CO2 equilibrium.